Snmp User Table Settings - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
To view the following window, click Management > SNMP Settings > SNMP Engine ID Settings, as shown below:
To change the Engine ID, type the new Engine ID value in the space provided.
The fields that can be configured are described below:
Parameter Description
The SNMP engine ID displays the identification of the SNMP engine on the Switch. The
Engine ID
default value is suggested in RFC2271. The very first bit is 1, and the first four octets are set to
the binary equivalent of the agent's SNMP management private enterprise number as
assigned by IANA (D-Link is 171). The fifth octet is 03 to indicate the rest is the MAC address
of this device. The sixth to eleventh octets is the MAC address.
Click the Apply button to accept the changes made.
NOTE: The Engine ID length is 10-64 and accepted characters can range from 0 to F.

SNMP User Table Settings

This window displays all of the SNMP User's currently configured on the Switch.
To view the following window, click Management > SNMP Settings > SNMP User Table Settings, as shown
below:
The fields that can be configured are described below:
Parameter
User Name
Figure 3-39 SNMP Engine ID Settings window
Figure 3-40 SNMP User Table Settings window
Description
An alphanumeric string of up to 32 characters. This is used to identify the SNMP users.
61