Poe System Settings - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
• The Auto-disable feature occurs under two conditions: firstly, if the total power consumption exceeds the
system power limit; and secondly, if the per port power consumption exceeds the per port power limit.
• Active circuit protection automatically disables the port if there is a short. Other ports will remain active.
Based on 802.3af/at PDs receive power according to the following classification:
Class
0
1
2
3
4
PSE provides power according to the following classification:
Class
0
1
2
3
User Defined
To configure the PoE features on the DES-3528P/DES-3552P, click Configuration > PoE. The PoE System
Settings window is used to assign a power limit and power disconnect method for the whole PoE system. To
configure the Power Limit for the PoE system, enter a value between 37W and 370W for the DES-3528P/DES-
3552P in the Power Limit field. The default setting is 370W. When the total consumed power exceeds the power
limit, the PoE controller (located in the PSE) disconnects the power to prevent overloading the power supply.

PoE System Settings

To view the following window, click System Configuration > PoE > PoE System Settings, as shown below:
Maximum power available to PD
Maximum power available to PD
Maximum 30W, PSE configuration is up to 35W (only for ports 1-8)
20
12.95 Watt
3.84 Watt
6.49 Watt
12.95 Watt
29.5 Waatt
15.4 Watt
4.0 Watt
7.0 Watt
15.4 Watt