D-Link Xstack DES-3528 Series Reference Manual page 139

Stackable fast ethernet switch web ui
Hide thumbs Also See for Xstack DES-3528 Series:
Table of Contents

Advertisement

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
Figure 4-73 MLD Snooping Multicast VLAN Settings – Edit window
The fields that can be configured are described below:
Parameter
VLAN Name
State
Replace Source IP
Remap Priority
Replace Priority
Unit
Untagged Member Ports
Tagged Member Ports
Untagged Source Ports
Tagged Source Ports
Click the Select All button to select all the ports for configuration.
Description
This option will display the VLAN name of the VLAN configured.
Use the drop-down menu to enable or disable the state.
With the MLD snooping function, the MLD report packet sent by the host will be
forwarded to the source port. Before forwarding of the packet, the source IP address
in the join packet needs to be replaced by this IP address. If none is specified, the
source IP address will not be replaced.
0-7 – The remap priority value (0 to 7) to be associated with the data traffic to be
forwarded on the multicast VLAN.
None – If None is specified, the packet's original priority is used. The default setting is
None.
Tick the check box to specify that the packet's priority will be changed by the Switch,
based on the remap priority. This flag will only take effect when the remap priority is
set.
Select a unit to be configured.
Specify the untagged member port of the multicast VLAN. Click the Select All button
to select all the ports or click the Clear All button to unselect all the ports.
Specify the tagged member port of the multicast VLAN. Click the Select All button to
select all the ports or click the Clear All button to unselect all the ports.
Specify the source port or range of source ports as untagged members of the
multicast VLAN. The PVID of the untagged source port is automatically changed to
the multicast VLAN. Source ports must be either tagged or untagged for any single
multicast VLAN, i.e. both types cannot be members of the same multicast VLAN
Specify the source port or range of source ports as tagged members of the multicast
VLAN.
132

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack des-3552 series

Table of Contents