D-Link Xstack DES-3528 Series Reference Manual page 156

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
To view the following window, click L2 Features > LLDP > LLDP-MED > LLDP-MED Port Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
NTCS
State
Capabilities
Network Policy
Power Pse
Inventory
All
Click the Apply button to accept the changes made.
LLDP-MED Local Port Information
On this page the LLDP-MED local port information will be displayed per port.
To view the following window, click L2 Features > LLDP > LLDP-MED > LLDP-MED Local Port Information, as
shown below:
Figure 4–97 LLDP-MED Port Settings Window
Description
Select a unit to configure.
Specifies a range of ports to be configured.
Here the user can enable or disable the notification topology change status.
Here the user can enable or disable TLVs.
This TLV type indicates that LLDP agent should transmit 'LLDP-MED capabilities TLV'.
If user wants to transmit LLDP-MED PDU, this TLV type should be enabled. Otherwise,
this port cannot transmit LLDP-MED PDU.
This TLV type indicates that LLDP agent should transmit 'LLDP-MED network policy
TLV'.
This TLV type indicates that the LLDP agent should transmit "LLDP-MED power PSE
TLV".
This TLV type indicates that LLDP agent should transmit 'LLDP-MED inventory TLV'.
Select this option to include Capabilities, Network Policy, Power Pse, and Inventory
in the configuration.
149