D-Link Xstack DES-3528 Series Reference Manual page 175

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
Parameter
Unit
From Port / To Port
DSCP Map
DSCP List (0-63)
DSCP (0-63)
Click the Apply button to accept the changes made.
To view the following window, click QoS > DSCP > DSCP Map Settings and select DSCP Color from the DSCP
Map drop-down menu, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
DSCP Map
DSCP List (0-63)
Color
Click the Apply button to accept the changes made.
Description
Select the unit to configure.
Use the drop-down menu to select a range of port to configure.
Use the drop-down menu to select one of two options:
DSCP Priority – Specify a list of DSCP values to be mapped to a specific priority.
DSCP DSCP – Specify a list of DSCP value to be mapped to a specific DSCP.
DSCP Color - Specify a list of DSCP values to be mapped to a specific color.
Enter a DSCP List value.
Enter a DSCP value. This appears when selecting DSCP DSCP in the DSCP Map
drop-down menu.
Figure 6-10 DSCP Map Settings - DSCP Color window
Description
Select the unit to configure.
Use the drop-down menu to select a range of port to configure.
Use the drop-down menu to select one of two options:
DSCP Priority – Specify a list of DSCP values to be mapped to a specific priority.
DSCP DSCP – Specify a list of DSCP value to be mapped to a specific DSCP.
DSCP Color - Specify a list of DSCP values to be mapped to a specific color.
Enter a DSCP List value.
Use the drop-down menu to specify the result color of the mapping.
168