Radius; Authentication Radius Server Settings - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide

RADIUS

Authentication RADIUS Server Settings

The RADIUS feature of the Switch allows the user to facilitate centralized user administration as well as providing
protection against a sniffing, active hacker.
To view this window, click Security > RADIUS > Authentication RADIUS Server Settings, as shown below:
The fields that can be configured are described below:
Parameter
Index
IPv4 Address
IPv6 Address
Authentication Port
(1-65535)
Accounting Port (1-
65535)
Timeout (1-255)
Retransmit (1-20)
Key (Max: 32
characters)
Confirm Key
Click the Apply button to accept the changes made.
Figure 8-20 Authentication RADIUS Server Settings window
Description
Choose the desired RADIUS server to configure: 1, 2 or 3 and select the IPv4 Address.
Click the radio button to enter the RADIUS server IP address.
Click the radio button to enter the RADIUS server IPv6 address.
Set the RADIUS authentic server(s) UDP port which is used to transmit RADIUS data
between the Switch and the RADIUS server. The default port is 1812.
Set the RADIUS account server(s) UDP port which is used to transmit RADIUS
accounting statistics between the Switch and the RADIUS server. The default port is
1813.
Set the RADIUS server age-out, in seconds.
Set the RADIUS server retransmit time, in times.
Set the key the same as that of the RADIUS server.
Confirm the key is the same as that of the RADIUS server.
225