Dhcpv6 Relay - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Pool Name
Click the Clear button to remove the specific entry based on the information entered.
Click the Clear All button to remove all the entries.
DHCP Conflict IP
To view this window, click Network Application > DHCP > DHCP Server > DHCP Conflict IP, as shown below:
Click the Clear All button to remove all the entries.

DHCPv6 Relay

DHCPv6 Relay Global Settings
This window is used to configure DHCPv6 relay global settings.
To view this window, click Network Application > DHCP > DHCPv6 Relay > DHCPv6 Relay Global Settings, as
shown below:
The fields that can be configured are described below:
Parameter
DHCPv6 Relay State
DHCPv6 Relay Hops
Figure 9-14 DHCP Server Dynamic Binding window
Description
Enter the name of the DHCP pool.
Figure 9-15 DHCP Conflict IP window
Figure 9-16 DHCPv6 Relay Global Settings window
Description
Click the radio buttons to enable or disable the DHCPv6 Relay service on the Switch.
The default is Disabled.
This field allows an entry between 1 and 32 to define the maximum number of router
292