Upload Log File; Reset - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
TFTP Server IP
File
Configuration ID
Filter
Click Upload to initiate the upload.

Upload Log File

This page allows the user to upload the log file from the Switch to a TFTP Server.
Open the Tools drop-down menu at the top of the Web manager and click Upload Log File to see the following
window:
The fields that can be configured are described below:
Parameter
TFTP Server IP
File
To upload a history or attack log from the Switch to a TFTP server, enter a Server IP address, and file/path name
and then click Upload or Upload Attack Log.
To upload either a common log or an attack log by HTTP, click the desired Log Type in the bottom half of the
window and then click Upload.

Reset

The Reset function has several options when resetting the Switch. Some of the current configuration parameters
can be retained while resetting all other configuration parameters to their factory defaults.
Description
Click the IPv4 or IPv6 radio button to enter the TFTP Server IP address.
Enter the location and name of the file.
Select a configuration ID.
Use the drop-down menu to include, begin or exclude a filter like SNMP, VLAN or STP.
Select the appropriate Filter action and enter the service name in the space provided.
Figure 12-9 Upload Log File window
Description
Click the IPv4 or IPv6 radio button to enter the TFTP Server IP address.
Enter the location and name of the file.
348