System Log Server Settings - D-Link Xstack DES-3528 Series Reference Manual

Stackable fast ethernet switch web ui
Hide thumbs Also See for Xstack DES-3528 Series:
Table of Contents

Advertisement

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
To view the following window, click System Configuration > System Log Configuration > System Log Settings,
as shown below:
The fields that can be configured are described below:
Parameter
Description
Use the radio buttons to enable or disable the system log settings. Click the Apply button to
System Log
accept the changes made.
Use the pull-down menu to choose the method for saving the switch log to the flash memory.
Save Mode
The user has three options:
On Demand – Users who choose this method will only save log files when they manually tell the
Switch to do so, either using the Save Log link in the Save folder or clicking the Save Log Now
button on this window.
Time Interval – Users who choose this method can configure a time interval by which the Switch
will save the log files, in the box adjacent to this configuration field. The user may set a time
between 1 and 65535 minutes.
Log Trigger – Users who choose this method will have log files saved to the Switch every time a
log event occurs on the Switch.
Click the Apply button to accept the changes made for each individual section.

System Log Server Settings

The Switch can send System log messages to up to four designated servers using the System Log Server.
To view the following window, click System Configuration > System Log Configuration > System Log Server
Settings, as shown below:
The fields that can be configured are described below:
Parameter
Server ID
Figure 2-17 System Log Settings window
Figure 2-18 System Log Server Settings
Description
Syslog server settings index (1 to 4).
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack des-3552 series

Table of Contents