Crank Angle Sensor Removal; Inspection; Installation - Mazda MX-5 1990 Workshop Manual

F
.
~
I
F-134
CONTROL SYSTEM
05UOFX-205
05UOFX-240
CRANK ANGLE SENSOR
Removal
1 . Disconnect the crank angle sensor connector
2. Remove the crank angle sensor.
Inspection
1 . Visually check the crank angle sensor for damage.
2. Replace if necessary.
Installation
1. Apply grease to the new O-ring and the blade .
2. Install the crank angle sensor.
Tightening torque:
19-27 N·m (1.9-2.6 m-kg, 14-20 ft-Ib)
3. Connect the crank angle sensor connector.
4. Adjust the ignition timing. (Refer to page F-75.)