Loading paper and specialty media
Loading paper and specialty media
Setting the size and type of the specialty media
1
From the control panel, navigate to:
> Settings >
2
Select a paper source, and then configure the size and type of the specialty media.
Configuring Universal paper settings
1
From the control panel, navigate to:
> Settings >
2
Select Portrait Width or Portrait Height, and then press
3
Adjust the settings, and then press
Loading trays
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1
Remove the tray.
Note: To avoid paper jams, do not remove trays while the printer is busy.
> Paper >
> Tray Configuration >
> Paper >
> Media Configuration >
.
> Paper Size/Type >
> Universal Setup >
.
15