OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-50
OS2070
Paper Tray 2 is empty
No paper remains in feeder tray 2.
The printer control console displays one of the following:
BOTH TRAYS SET FOR _._X_._" PAPER
BOTH TRAYS SET FOR _X_MM PAPER
PAPER TRAY 2 IS EMPTY. TRAY 2 IS SET FOR _._X_._" PAPER
PAPER TRAY 2 IS EMPTY. TRAY 2 IS SET FOR _X_MM PAPER
PRINTER IS WARMING UP--PAPER TRAY 2 IS EMPTY-- PRESS i
Action
Add paper to feeder tray 2. (Refer to the chapter on feeder trays in
your DocuPrint 96/DocuPrint 96MX LPS Operator Guide .)
PRINTING--PAPER TRAY 2 IS EMPTY. BOTH TRAYS SET FOR
_._X_._" PAPER
PRINTING--PAPER TRAY 2 IS EMPTY. BOTH TRAYS SET FOR
_X_MM PAPER
READY TO PRINT--PAPER TRAY 2 IS EMPTY--PRESS i
TRAY 1 IS SET FOR _._X_._" PAPER. TRAY 2 IS SET FOR
_._X_._" PAPER
TRAY 1 IS SET FOR _X_MM PAPER. TRAY 2 IS SET FOR _X_MM
PAPER
1. Press the i button on the printer control console for additional
console messages if instructed to do so by the printer control
console display. (Refer to the chapter on feeder trays in your
DocuPrint 96/DocuPrint 96MX LPS Operator Guide .)
2. Add paper to feeder tray 2. (Refer to the chapter on feeder trays
in your DocuPrint 96/DocuPrint 96MX LPS Operator Guide .)
3. Press the <CON> key to resume printing.
OS2080
Paper Tray x is empty.
The paper tray indicated in the message is empty, thus causing the
printer to cycle down or preventing it from cycling up.
Action
1. Add paper to the tray indicated.
2. Restart the job.
OS2090
Trays 1 or 2 must be used for transparencies.
Trays 1 or 2 must be specified (separately or in a cluster) in order to
print your job on transparencies.
Action
1. Reenter the command, specifying trays 1 or 2.
2. Enter the CONTINUE command to resume printing.
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE