Icom MarineComander MXS-5000 Instruction Manual page 96

3
RADAR OPERATION
■ Bearing measurement
This radar has 2 Electronic Bearing Lines (EBL) to indicate the target direction from your ship or another target.
D Using the EBL and VRM
Target EBL1
q Push [MENU] to enter the Menu screen.
EBL1 readout
w Rotate [DIAL] until the "EBL/VRM" menu becomes
highlighted.
e Push [ENTER] then rotate [DIAL] until the
"EBL1..."/"EBL2..." menu becomes highlighted.
r Push [ENTER], and then rotate [DIAL] to set the
marker.
• The yellow dotted line appears.
• The EBL1/EBL2 readout indicates the target bearing;
0 to 360°R
P/S 0 to 180° : Bow direction, when 'PT/SB' is selected
0 to 360°T* : True or magnetic bearing, when select-
t Push [ENTER].
• The yellow dotted line becomes red dotted line.
3-24
: Relative direction, when '360°R' is se-
"
lected in the EBL Bearing Reference
menu. (see p. 3-19)
"
in the EBL Bearing Reference
(see p. 3-19)
"
ing 'TRUE' in the EBL Bearing Refer-
"
ence menu. (see p. 3-19)
*External bearing data is required.
"
"
menu.