Icom MarineComander MXS-5000 Instruction Manual page 65

<Sounding–Presentation menu>
<Sounding–Depth Setting menu>
<NAV-AIDS–Lights menu>
• Sounding–Presentation
( MENU w Chart Setup u Manual - Display Mode u
Sounding u Presentation)
This item enables the water depth value to be dis-
played on the ocean surface of the plotter display.
• OFF : The water depth value is not displayed on
the ocean surface of the plotter display.
• ON : The water depth value is displayed on the
ocean surface of the plotter display.
• Sounding–Depth Setting
( MENU w Chart Setup u Manual - Display Mode u
Sounding u Depth Setting)
Set the maximum water depth value to be displayed on
the plotter display.
Rotate [DIAL] to adjust the maximum water depth
➥
value to between 0 m and 2800 m in 1 meter step.
(Default: 305 m)
• NAV-AIDS–Lights, Buoys, Signals, Light Sectors,
Light Animation
( MENU w Chart Setup u Manual - Display Mode u
NAV - AIDS u Lights/Buoys/Signals/Light Sectors/
Light Animation)
This item enables a "NAV-AIDS" (aids to navigation)
icon to be displayed on the plotter display.
The following "NAV-AIDS" objest's icon indication can
be turned ON or OFF; Light (Lighthouse), Buoys, Sig-
nals (Fog signal)
Moreover, the Light Sectors and Light Animation can
be turned ON or OFF, if necessary.
Rotate [DIAL] until the desired object menu is high-
q
lighted, then push [ENTER].
Rotate [DIAL] to turn the selected object indication
w
ON or OFF.
• OFF : The selected object icon is not displayed on
the plotter display.
• ON : The selected object icon is displayed on the
plotter display.
2-49
PLOTTER OPERATION
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21