Icom MarineComander MXS-5000 Instruction Manual page 16

1
BASIC OPERATION
Screen arrangement (Continued)
■
D Change Layout
The default layouts cannot
be changed.
D Erase a screen layout
The default layouts cannot
be erased.
D Move a screen layout
Hold down [LAYOUT](FOCUS) for 3 seconds to en-
q
ter the screen selection mode.
Rotate [DIAL] to select the desired screen to be
w
changed, then push [SUB].
• Push [CLEAR] to cancel and return to the previous
screen before entering the screen selection mode.
Rotate [DIAL] to select "Edit," then push [ENTER].
e
• One screen, two split screen, three split screen or four
split screen type can be selected.
• Push [CLEAR] to return to step w.
r Rotate [DIAL] to select the desired application to the
screen, then push [ENTER].
• Push [CLEAR] to return to the previous screen.
t Repeat step r until all split screens are selected
their application.
Hold down [LAYOUT](FOCUS) for 3 seconds to en-
q
ter the screen selection mode.
Rotate [DIAL] to select the desired screen to be
w
erased, then push [SUB].
• Push [CLEAR] to cancel and return to the previous
screen before entering the screen selection mode.
Rotate [DIAL] to select "Erase," then push [EN-
e
TER].
• Confirmation screen appears.
r Rotate [DIAL] to select "Yes," then push [ENTER].
Hold down [LAYOUT](FOCUS) for 3 seconds to en-
q
ter the screen selection mode.
Rotate [DIAL] to select the desired screen to be
w
moved, then push [SUB].
• Push [CLEAR] to cancel and return to the previous
screen before entering the screen selection mode.
Rotate [DIAL] to select "Move," then push [ENTER].
e
r Rotate [DIAL] to move the screen, then push [EN-
TER].
1-14