Icom MarineComander MXS-5000 Instruction Manual page 29

BRILL
WPT
MOB
RANGE
FOCUS
LAYOUT
SUB
MENU CLEAR
When the "Next Waypoint" is selected.
D Next Waypoint
(MENU w Navigation u Next Waypoint)
While Follow Route navigation is ON, this function sets
the next waypoint as the destination.
Push [MENU], then rotate [DIAL] until the "Naviga-
q
tion" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Next Waypoint" menu is
w
highlighted, then push [ENTER].
[MENU] • The next waypoint is set as the destination.
[CLEAR]
D Back Waypoint
(MENU w Navigation u Back Waypoint)
[DIAL]/
While Follow Route navigation is ON, this function sets
[ENTER]
the previous waypoint as the destination.
Push [MENU], then rotate [DIAL] until the "Naviga-
q
tion" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Back Waypoint" menu is
w
highlighted, then push [ENTER].
• The previous waypoint is set as the destination.
D Reset XTE (Cross Track Error)
(MENU w Navigation u Reset XTE)
While navigation, you can reset its route. This function
enables you to step off the preset track, and directly
navigate to the destination from the current position.
Push [MENU], then rotate [DIAL] until the "Naviga-
q
tion" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Reset XTE" menu is high-
w
lighted, then push [ENTER].
• The navigation route is reset.
2-13
PLOTTER OPERATION
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21