Icom MarineComander MXS-5000 Instruction Manual page 154

5
COMMON SETTING
Tool (MENU w Tool)
■
D List (Continued)
<ATA List screen>
• ATA List
(MENU w Tool u List u ATA...)
The ATA (Automatic Tracking Aid) list shows the tar-
gets which are automatically tracked.
Maximum number of the target displayed on the screen
is 10.
Push [MENU], then rotate [DIAL] until the "Tool"
q
menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "List" menu is highlighted,
w
then push [ENTER].
Rotate [DIAL] until the "ATA..." menu is highlighted,
e
then push [ENTER].
• The ATA List are displayed.
• When [SUB] is pushed, the following operations can be
made:
- Clear Target
- Clear All Target
r Push [CLEAR] to exit the "ATA..." menu.
• ATA List—Clear Target
A target displayed on the ATA list can be cleared on the
ATA Sub Menu screen.
When the ATA List is displayed, rotate [DIAL] until
q
the desired target is highlighted.
Push [SUB] to display the ATA Sub Menu screen.
w
Rotate [DIAL] until the "Clear Target" menu is high-
e
lighted, and push [ENTER].
r Rotate [DIAL] to select "OK," then push [ENTER] to
clear the ATA and return to the previous screen.
• If "Cancel" is selected, the ATA erasing will be can-
celled.
• ATA List—Clear All Target
All target displayed on the ATA list can be cleared on
the ATA Sub Menu screen.
When the ATA List is displayed, push [SUB] to dis-
q
play the ATA Sub Menu screen.
Rotate [DIAL] until the "Clear All Target" menu be-
w
comes highlighted, and push [ENTER].
e Rotate [DIAL] to select "OK," then push [ENTER] to
save the ATA and return to the previous screen.
• If "Cancel" is selected, the ATA erasing will be can-
celled.
5-8