Icom MarineComander MXS-5000 Instruction Manual page 50

2
PLOTTER OPERATION
Presentation (MENU
■
<AIS Symbol menu>
<Reset AIS Track menu>
w Presentation) (Continued)
D AIS Symbol
(MENU w Presentation u AIS Symbol)
The AIS symbol and track data indication can be se-
lected.
Push [MENU], then rotate [DIAL] until the "Presen-
q
tation" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "AIS Symbol" menu is high-
w
lighted, then push [ENTER].
Rotate [DIAL] to select the AIS symbol indication
e
type.
• OFF
• Symbol
• Symbol & Track : AIS symbol and track are dis-
r Push [ENTER] to set, then exit the "AIS Symbol"
menu.
• Description of the icons
Icon
Normal mark.
Selected mark.
CPA/TCPA alarm mark in Red. The tar-
get is close to within a minimum range
and time. The icon blinks and alarm
emits. Push [CLEAR] to cancel the
alarm.
AIS data error. There is the lack of data
in the received AIS signal.
When the AIS signal has not updated
(received) for a specific time of period,
the icon starts to blink and alarm emits.
If the AIS signal has not still updated
(received) for a specific time of period,
the target icon disappears.
D Reset AIS Track
(MENU w Presentation u Reset AIS Track)
The AIS Track data can be reset.
This item can be set only when "Symbol & Track" is
selected in the "AIS Symbol" item as above.
Push [MENU], then rotate [DIAL] until the "Presen-
q
tation" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Reset AIS Track" menu is
w
highlighted, then push [ENTER] to reset, and exit
the "Reset AIS Track" menu.
2-34
: AIS symbol and track are not
displayed.
: AIS symbol is displayed.
played.
Description