Icom MarineComander MXS-5000 Instruction Manual page 49

<ATA Symbol menu>
<Reset ATA Track menu>
D ATA Symbol
(MENU w Presentation u ATA Symbol)
The ATA symbol and track data indication can be se-
lected.
Push [MENU], then rotate [DIAL] until the "Presen-
q
tation" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "ATA Symbol" menu is high-
w
lighted, then push [ENTER].
Rotate [DIAL] to select the ATA symbol indication
e
type.
• OFF : ATA symbol and track are not
• Symbol : ATA symbol is displayed.
• Symbol & Track : ATA symbol and track are dis-
r Push [ENTER] to set, then exit the "ATA Symbol"
menu.
• Description of the icons
Icon
Selected, uncalculated mark.
Normal, calculated mark.
Selected, calculated mark.
CPA/TCPA alarm mark. The target
is close to within a minimum range
and time. Alarm emit indicator. Push
[CLEAR] to cancel the alarm.
When the tracking of a target disap-
pears.
D Reset ATA Track
(MENU w Presentation u Reset ATA Track
The ATA Track data can be reset.
This item can be set only when "Symbol & Track" is
selected in the "ATA Symbol" item as above.
Push [MENU], then rotate [DIAL] until the "Presen-
q
tation" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Reset ATA Track" menu is
w
highlighted, then push [ENTER] to reset, and exit
the "Reset ATA Track" menu.
2-33
PLOTTER OPERATION
displayed.
played.
Description
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21