Table of Contents
Advertisement
2
PLOTTER OPERATION
■ Route navigation function (Continued)
WPT
MOB
FOCUS
LAYOUT
MENU
<Route List—View Detail menu>
When the "View Detail" menu is selected.
• Route detail screen
<Route List—Go on Chart menu>
BRILL
[MENU]
RANGE
[SUB]
SUB
[CLEAR]
CLEAR
[DIAL]/
[ENTER]
Push
D
Route List
(MENU w Navigation u Route List...)
The created route information can be checked or ed-
ited.
Push [MENU], then rotate [DIAL] until the "Naviga-
q
tion" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Route List..." menu is high-
w
lighted, then push [ENTER].
• The Route List screen is displayed.
• When [SUB] is pushed, the following operations can be
made:
- View Detail... (p. 2-14)
- Go on Chart (p. 2-14)
- Follow Route (p. 2-15)
- Reverse Route (p. 2-15)
- Edit Route Info... (p. 2-16)
- Erase Route (p. 2-17)
- Erase All Route (p. 2-17)
Push [CLEAR] to return to the previous screen.
e
• Route List—View Detail
You can check a route detail information on the Route
List Sub Menu screen.
When the Route List screen is displayed, rotate
q
[DIAL] until the desired route is highlighted, then
push [SUB].
• The Route List Sub Menu screen is displayed.
Push [ENTER] to enter the "View Detail..." menu.
w
Rotate [DIAL] to select the waypoint of the route to
e
show its detail information.
r Push [CLEAR] to return to the previous screen.
NOTE: When the Route Detail screen is displayed,
pushing [Ù] or [Ú] sequentially selects the next (or
previous) waypoint.
• Route List—Go on Chart
This function enables the cursor to move to the start
point of the selected route on the plotter display.
When the Route List screen is displayed, rotate
q
[DIAL] until the desired route is highlighted, then
push [SUB].
• The Route List Sub Menu screen is displayed.
Rotate [DIAL] until the "Go on Chart" menu is high-
w
lighted, then push [ENTER].
• The Route List Sub Menu screen disappears, and the
cursor automatically moves to the start point of the se-
lected route.
2-14
Advertisement
Chapters
Table of Contents
