Basic Operation; Mxd-5000 (Display Unit); Front Panel - Icom MarineComander MXS-5000 Instruction Manual

1

BASIC OPERATION

■ MXD-5000 (Display unit)

D Front panel
q POWER/DISPLAY BRILLIANCE SWITCH
[ /BRILL]
• While the MarineCommander's power is OFF
Push to turn ON the MarineCommander's power.
• While the MarineCommander's power is ON
➥ Push to open Quick Menu 1.
• The Quick Menu 1 includes the Display Brilliance,
Radar TX setting, Panel Brilliant and Color Palette.
• Push two or more times to increase or decrease
the display brilliance level.
➥ Hold down for 3 seconds to turn OFF the Mari-
neCommander's power.
w WAYPOINT/MAN OVERBOARD SWITCH
[WPT/MOB]
Push to open the Waypoint screen.
➥
• The Waypoint window appears.
When a crew member falls overboard, hold down
➥
for 3 seconds to mark the man overboard point
on the screen.
• The MOB readout shows the bearing and distance to
the MOB point. (Position data is necessary.)
• Hold down [MOB] for 3 seconds to cancel the func-
tion.
e RANGE UP/ DOWN SWITCHES [+]/[–]
Push [+] or [–] to set a suitable screen range.
BRILL
WPT
MOB
RANGE
FOCUS
LAYOUT
SUB
MENU CLEAR
r FOCUS/DISPLAY LAYOUT SWITCH
[FOCUS/LAYOUT]
Push to change the active screen.
➥
• An orange border indicates the active screen.
Hold down for 3 seconds to open the display se-
➥
lection screen.
t UP, DOWN, LEFT, RIGHT KEYS [Ù] [Ú] [
➥ Push arrow [Ù], [Ú], [Ω] or [≈] to move the cur-
sor up, down, left or right on the active screen.
Push the dot to move at an angle.
➥ In the Menu screen, push [Ù] or [Ú] to select an
item.
➥ In Quick Menu 1 or Quick Menu 2, push [Ω] or [≈]
to select an item.
➥ In Quick Menu 1 or Quick Menu 2, push [Ù] or
[Ú] to select an option or adjust a level.
y SUB MENU SWITCH [SUB]
In the Menu screen, push to enter the Sub
➥
Menu.
On the Plotter screen, Radar screen or Sounder
➥
screen, push to enter the Cursor Menu, depend-
ing on the Cursor position.
u MENU SWITCH [MENU]
Push to select the Menu screen.
1-2
q
w
e
r
t
y
u
Ω] ≈
[ ]