Icom MarineComander MXS-5000 Instruction Manual page 178

5
COMMON SETTING
■ System Setup
<System Setup -Display menu->
<System Setup -General menu->
(For future use)
(MENU w System Setup)
D Display
• Data-Bar Setup
Select the data to display on Palette1 to Palette4.
• Status-Bar Setup...
Select the items to display on the status bar.
• Power Control Synchronization
Select OFF to keep the display's power independent
of other displays, when turning power OFF.
D General
• Key Beep
Select ON to sound a beep when pushing a key.
• Position Display
Select the type of position data to display.
Lat./Lon.: Latitude/Longitude
TD: Loran-C Time Difference
• TD Setup
Select the Loran station, TD and correction time.
• Local Time Offset
Set the UTC time offset. (–13:30 to +13:30)
• Time Display
Select the 12 hour or 24 hour time format.
• Date Display
Select the date format.
YYYY/MM/DD: (example 2011/08/12)
MM/DD/YYYY: (example 08/12/2011)
DD/MM/YYYY: (example 12/08/2011)
• Bearing Mode
Select the bearing mode.
True: T
rue north bearing.
Magnetic:
Magnetic north bearing.
• Variation
Select the Variation Data Source.
Auto: Use the variation data from the GPS.
Manual: Use the manually input data.
• Manual Variation
Input the variation in ºW or ºE.
• Vector Time
Select the vector length (time).
• ETA/TTG Calculation
SOG: The calculation is based on SOG.
Manual: The calculation is based on manually
input speed.
5-32