Icom MarineComander MXS-5000 Instruction Manual page 149

<Goto Waypoint menu>
Navigation screen
<Go on Chart menu>
• Waypoint List—Goto Waypoint
The vessel can be navigated from the current position
to the specified waypoint (within one section only).
When the Waypoint List is displayed, rotate [DIAL]
q
until the desired waypoint becomes highlighted.
Push [SUB] to display the Waypoint Sub Menu
w
screen.
Rotate [DIAL] until the "Goto Waypoint" menu be-
e
comes highlighted, and push [ENTER].
r The Goto Waypoint navigation starts.
• The navigation screen appears.
• Waypoint List—Go on Chart
This function enables the cursor to move to the se-
lected Waypoint on the plotter display.
When the Waypoint List is displayed, rotate [DIAL]
q
until the desired waypoint is highlighted, then push
[SUB].
• The Waypoint Sub Menu screen is displayed.
Rotate [DIAL] until the "Go on Waypoint" menu is
w
highlighted, then push [ENTER].
• The Waypoint Sub Menu screen disappears, and the
cursor automatically moves to the selected Waypoint.
5-3
COMMON SETTING
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21