Icom MarineComander MXS-5000 Instruction Manual page 45

<Route Show menu>
<Route Setup menu>
• Route–Presentation Setup screen
D Route
Push [MENU], then rotate [DIAL] until the "Presen-
q
tation" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Route" menu is highlighted,
w
then push [ENTER].
Rotate [DIAL] until the desired menu is highlighted,
e
then push [ENTER].
• Show
(MENU w Presentation u Route u Show)
The Route line indication can be turned ON or OFF.
• OFF : The Route line is not displayed on the plot-
ter display.
• ON : The Route line is displayed on the plotter
display.
• Setup...
(MENU w Presentation u Route u Setup)
The individual Route line indication can be turned ON
or OFF.
This item can be set only when the Route line is turned
ON in the "Show" item as described above.
NOTE: Maximum twenty Route lines can be dis-
played on the plotter display.
Push [ENTER] then rotate [DIAL] until the desired
q
route becomes highlighted.
Push [Ω] or [≈] to turn the selected Route line indi-
w
cation ON or OFF.
• OFF : The selected Route line is not displayed on
the plotter display.
• ON : The selected Route line is displayed on the
plotter display.
Push [CLEAR] to set, then exit the "Setup..." menu.
e
2-29
PLOTTER OPERATION
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21