Icom MarineComander MXS-5000 Instruction Manual page 170

5
COMMON SETTING
Tool (MENU w Tool) (Continued)
■
<Load ID... menu>
While loading.
<DSC Setup—DSC Dialog menu>
<DSC Setup—Auto Position 1/2/3 menu>
• Load ID
(MENU w Tool u DSC u Load ID)
The Individual ID or Group ID can be load from the
connected transceiver.
Rotate [DIAL] to select "OK," then push [ENTER] to
➥
load the transceiver's data.
• DSC Setup—DSC Dialog
( MENU w Tool u DSC u DSC Setup u
DSC Dialog)
The DSC Dialog function enables to plot the specified
station's position log.
Rotate [DIAL] to turn the DSC Dialog function ON
➥
or OFF.
• OFF : The DSC Dialog function is OFF.
• ON : The DSC Dialog function is ON.
When the DSC call including the position
information is received from the specified
station, its position log is automatically plot-
ted on the Auto Position Log screen.
• DSC Setup—Auto Position 1/2/3
( MENU w Tool u DSC u DSC Setup u
Auto Position 1/2/3)
You can select the desired station whose position data
is plotted when the transmitted DSC call includes the
position information.
Make sure that the Individual ID has already been reg-
istered. (p. 5-20)
5-24