Icom MarineComander MXS-5000 Instruction Manual page 61

<Chart Offset at Cursor menu>
<Chart Offset N-S menu>
<Chart Offset E-W menu>
D Offset at Cursor setting
(MENU w Chart Setup u Set Offset at Cursor)
When the Chart Offset function is ON, the vessel's
position data can be changed to the point where the
cursor positions.
The cursor position should be within ±3280 ft from the
current vessel's position.
Push [MENU], then rotate [DIAL] until the "Chart
q
Setup" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Set Offset at Cursor" menu
w
is highlighted, then push [ENTER].
Push [Ù], [Ú], [Ω] or [≈] to set the cursor position.
e
r Push [ENTER] to change the vessel's position to the
cursor position.
Push [CLEAR] to exit the "Set Offset at Cursor"
t
mode.
D Offset N-S setting
(MENU w Chart Setup u Set Offset N-S)
Set the offset value at latitude. The Chart Offset func-
tion shifts the plotter map up to ±3280 feet from the
current latitude position, without changing vessel's
current latitude/longitude data.
Push [MENU], then rotate [DIAL] until the "Chart
q
Setup" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Set Offset N-S" menu is
w
highlighted, then push [ENTER].
Rotate [DIAL] to set the offset value at latitude to
e
between –3280 ft and +3280 ft in 1 feet steps.
Push [ENTER] to set, then exit the "Set Offset N-S"
r
menu.
• To cancel the setting, push [CLEAR].
D Offset E-W setting
(MENU w Chart Setup u Set Offset E-W)
Set the offset value at longitude. The Chart Offset
function shifts the plotter map up to ±3280 feet from
the current longitude position, without changing ves-
sel's current latitude/longitude data.
Push [MENU], then rotate [DIAL] until the "Chart
q
Setup" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Set Offset E-W" menu is
w
highlighted, then push [ENTER].
Rotate [DIAL] to set the offset value at longitude to
e
between –3280 ft and +3280 ft in 1 feet steps.
Push [ENTER] to set, then exit the "Set Offset E-W"
r
menu.
• To cancel the setting, push [CLEAR].
2-45
PLOTTER OPERATION
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21