Icom MarineComander MXS-5000 Instruction Manual page 162

5
COMMON SETTING
Tool (MENU w Tool) (Continued)
■
• Send DSC screen
Push
Push
Push
D DSC
Push [MENU], then rotate [DIAL] until the "Tool"
q
menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "DSC" menu is highlighted,
w
then push [ENTER].
Rotate [DIAL] until the desired menu is highlighted,
e
then push [ENTER].
• Send DSC...
(MENU w Tool u DSC u Send DSC...)
The connected transceiver can be transmitted DSC
call by operating MarineCommander
Ex.) Transmitting Individual Call
Rotate [DIAL] to select the desired Call, then push
q
[ENTER].
• Individual Call, Group Call, All Ships Call, Position Re-
quest, Position Report or Polling Request can be select-
ed.
Rotate [DIAL] to select the Address, then push [EN-
w
TER].
• When the Individual ID is preprogrammed, the prepro-
grammed MMSI or Name can be selected.
• When Manual input is selected, Input DSC Address
screen appears.
Rotate [DIAL] to select a Category, then push [EN-
e
TER].
• Depending on the connected transceiver or selected
Call, this step will be automatically skipped.
Rotate [DIAL] to select an InterShip Channel, then
r
push [ENTER].
t Select the "TX" button and push [ENTER] to trans-
mit an Individual Call.
5-16
.
tm