Icom MarineComander MXS-5000 Instruction Manual page 180

5
COMMON SETTING
System Setup (MENU
■
<System Setup -NMEA2000 Setup->
<System Setup -NMEA2000 Output Setup->
<System Setup -NMEA Source Setup->
<System Setup -Reset menu->
w System Setup) (Continued)
• NMEA2000 Setup...
Displays the list of equipment connected to the
NMEA2000 port.
Push [SUB] to open the sub menu, and select the
combination of equipment to use.
(ex. If GPS and compass are connected, select
GPS & Compass.
"
• NMEA2000 Output Setup...
Select the NMEA2000 sentence to output.
• Heading Data Input
Select the Heading data source.
NMEA : Use the data source from the heading
sensor of NMEA0183 or NMEA2000.
AUX : Use the data source from the external
equipment which outputs the AUX format
heading data.
GPS : Use the COG from the GPS as the
Heading data.
• STW Input
Select the ship speed data source.
Sounder : Use the data source from the sounder's
speed sensor in the transducer.
NMEA : Use the data source from the speed
sensor connected with NMEA.
• NMEA Source Setup...
Select the data format for each equipment from
NMEA0183 or NMEA2000.
Note: This setting is neccesary when using external
equipment. Select the properly data format.
• Data Master Setup...
When using two MarineCommanders
Slave relation is selectable.
Note: When one side is set to
side is automatically set to
Master : Use the NMEA data from the equipment
which is directly connected.
Slave : Use the NMEA data from the Master.
D Reset
Reset the operating parameters to their default
values.
• Reset Trip Log
Reset all the trip logs.
• Setting Reset
• Factory Reset
• Radar Reset
• Sounder Reset
See the list on the page 5-35 to 5-37 for the items
that can be selected to be reset.
( : The item to be reset.)
K
5-34
)
"
, Master-
tm
Master, another
" "
Slave.
" "