Table of Contents
Advertisement
5
COMMON SETTING
Tool (MENU
w Tool) (Continued)
■
<Individual ID... menu>
<Individual ID—Add Individual ID menu>
• Individual ID screen
• Individual ID...
(MENU w Tool u DSC u Individual ID...)
The registered Individual IDs are listed.
Push [MENU] to enter the Menu screen.
q
Rotate [DIAL] until the "Tool" menu becomes high-
w
lighted.
Push [ENTER] to enter the "Tool" menu.
e
r Rotate [DIAL] until the "DSC" menu becomes high-
lighted, and push [ENTER].
t Rotate [DIAL] until the "Individual ID..." menu be-
comes highlighted, and push [ENTER].
• The Individual ID List is displayed.
• When [SUB] is pushed, the following operations can be
made:
- Add Individual ID...
- Edit Individual ID...
- Erase Individual ID
- Erase Individual ID
y Push [CLEAR] to exit the "Individual ID..." menu.
• Individual ID—Add Individual ID
A new Individual ID can be created on the Individual ID
Sub Menu screen.
NOTE: The maximum number of Individual ID is 200.
When the Individual ID List is displayed, push [SUB]
q
to display the Individual ID Sub Menu screen.
Push [ENTER] to enter the "Add Individual ID"
w
menu.
• "Individual ID" screen appears.
Rotate [DIAL] to select the desired item, and push
e
[ENTER].
• See below for details.
r Rotate [DIAL] to select "Save," then push [ENTER]
to save the Individual ID and return to the previous
screen.
• If "Cancel" is selected, the setting will be cancelled.
MMSI code programming:
q Rotate [DIAL] to select "MMSI," and push [EN-
TER].
w Rotate [DIAL] to set the code, then after inputting
the 9 digit code, push [ENTER] to set.
• Push [≈] to move the cursor forward.
• Push [Ω] to move the cursor backward.
• The first digit is specified as '0' for a Group ID.
• The first two digits are '0' for any Coast station ID.
Name programming:
q Rotate [DIAL] to select "Name," and push [EN-
TER].
w Input a Individual ID name of up to 10 characters.
• See page 5-31 for programming details.
e Rotate [DIAL] to select "OK," then push [ENTER]
to set and return to the previous screen.
• If "Cancel" is selected, the "Setting Change" screen will
appear. Select "Yes" if you want to continue to program,
or select "No" if you want to cancel the program.
5-20
Advertisement
Chapters
Table of Contents
