Icom MarineComander MXS-5000 Instruction Manual page 39

BRILL
WPT
MOB
RANGE
FOCUS
LAYOUT
SUB
MENU CLEAR
<Track Method menu>
<Track Interval Time>
<Track Interval Distance>
D Track Setup
(MENU w Track u Track Setup)
Push [MENU], then rotate [DIAL] until the "Track"
q
menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Track Setup" menu is high-
w
lighted, then push [ENTER].
Rotate [DIAL] until the desired menu is highlighted,
e
then push [ENTER].
[MENU]
[CLEAR]
[DIAL]/
[ENTER]
• Track Method
To select the Track method, follow the steps as de-
scribed below.
Rotate [DIAL] to select the track method to between
➥
Time and Distance.
• Time
• Distance
The tracking interval can be set in the "Track Interval
Time" or "Track Interval Distance" menu.
• Track Interval Time
To change the tracking interval time, follow the steps
as described below.
Rotate [DIAL] to adjust the interval time to between
➥
00m01s and 99m59s in 00m01s step.
(Default: 00m10s)
• Track Interval Distance
To change the tracking interval distance, follow the
steps as described below.
Rotate [DIAL] to adjust the interval distance to be-
➥
tween 0.01 nm and 100.00 nm in 0.01 nm step.
(Default: 0.10 nm)
2-23
PLOTTER OPERATION
: The system stores and plots the track at
the specified interval time.
: The system stores and plots the track at
the specified interval distance.
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21