Icom MarineComander MXS-5000 Instruction Manual page 93

<Setting the TX inhibit area>
TX inhibit area
Setting the TX inhibit area
Tune Level indicator
<Scanner Monitor screen>
<Tuning Level indicator>
Tune Level indicator
D TX Inhibit
Set the TX inhibit area.
• OFF : No TX inhibit area is set.
• ON : Set the TX inhibit area as below;
q Rotate [DIAL] counter clockwise to
set the start point of the TX inhibit
area, and then push [ENTER].
w Rotate [DIAL] clockwise to set the
end point of the TX inhibit area, and
then push [ENTER].
D Timing Adjust...
Correct the distance from 0 to 30. (Default: 25)
D HDG Adjust...
Adjust the SHM position from –180º to +180º, in
0.2º. (Default: 0)
D ANT Rotate
• Select OFF to stop the antenna rotation.
D Scanner Monitor...
Displays the Scanner information window.
D TUNE Monitor...
Displays the Tunig Level indicator.
3-21
RADAR OPERATION
3
1
2
3
S
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21