Table of Contents
Advertisement
2
PLOTTER OPERATION
Search function (MENU
■
WPT
MOB
FOCUS
LAYOUT
MENU
• Port Information Sub Menu screen
w Search) (Continued)
BRILL
RANGE
[ÙÚΩ≈]
[MENU]
SUB
[CLEAR]
CLEAR
[DIAL]/
[ENTER]
• Port Information—Goto
The Goto means that the vessel is navigated from the
current position to the specified port position.
When the Port Information screen is displayed, ro-
q
tate [DIAL] until the desired port is highlighted, then
push [SUB].
• The Port Information Sub Menu screen is displayed.
Rotate [DIAL] until the "Goto" menu is highlighted,
w
then push [ENTER] to start the navigation.
• The Port Information Sub Menu screen disappears, and
the navigation screen appears.
See page 2-12 to stop the navigation.
e
• Port Information—Go on Chart
This function enables the cursor to move to the speci-
fied port position on the plotter display.
When the Port Information screen is displayed, ro-
q
tate [DIAL] until the desired port is highlighted, then
push [SUB].
• The Port Information Sub Menu screen is displayed.
Rotate [DIAL] until the "Go on Chart" menu is high-
w
lighted, then push [ENTER].
• The Port Information Sub Menu screen disappears, and
the cursor automatically moves to the specified port po-
sition.
2-26
Advertisement
Chapters
Table of Contents
