Table of Contents
Advertisement
SPD
12.3KT
TCPA
0:50
■ ATA operation
Target information window
Vector Mode
Identification No.
Course
Speed
Closest Point of Approach
Time to Closest Point of Approach
D Set the tracking target
qPush [MENU], and then rotate [DIAL] until the "Ac-
quire Target" menu becomes highlighted.
wPush [ENTER], and then push [] to move
the " M " cursor on the desired target to track.
• Dotted square symbol appears on the cursor.
• Target identification number, course (CSE), speed
(SPD), CPA and TCPA are displayed on the target
information window.
• The vector appears on the target, after 20 sec-
onds has passed.
• When the tracking target disappears, the mark
changes to a lozenge and is blinked. The mark
disappears after one minute passed, and the tar-
get is deleted from the ATA list, .
• When a target advances within a setting value,
the mark changes to a triangle, blinks and sounds
alarm sound.
D Target information
qPush [] to move the "+" cursor on the de-
sired target.
wPush [ENTER]
• The selected target information is displayed on
the information window.
D Select the target on the information window
qPush [] to move the "+" cursor on the target
information window, and then push [SUB].
wRotate [DIAL] to change the target to be selected.
D Cancel the tracking
qPush [] to move the cursor on the target to
cancel the tracking, and then push [SUB].
wSelect [Clear Target], and then push [ENTER].
eSelcet [OK], and then push [ENTER].
D Plotting marks
There are 5 kinds of plotting marks.
: Selected, uncalculated mark.
: Normal, calculated mark.
: Selected, calculated mark.
: CPA/TCPA alarm mark. The target is close to
within a minimum range and time. Alarm emit
indicator. Push [CLEAR] to cancel the alarm.
: When the tracking of a target disappears.
The icon disappears after 1 minute passed.
3-29
RADAR OPERATION
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Advertisement
Chapters
Table of Contents
