Table of Contents
Advertisement
• Received Call Log screen
Push
( When the selected call included its position data,
push [ENTER] to put the transmitted station's
position on the map when the Call has been
transmitted. )
<Received Call Log—Filter menu>
• Received Call Log...
(MENU w Tool u DSC u Received Call Log...)
This screen shows the received Call Log for the con-
nected transceiver.
NOTE: The maximum number of received DSC mes-
sage is 100.
Rotate [DIAL] to select a received Call.
q
Push [ENTER] to put the transmitted station's posi-
w
tion on the map when the Call has been transmit-
ted.
• When [SUB] is pushed, the following operations can be
made:
- Filter
- Send ACK...
- Go on Chart
- Register ID...
- Erase Message
- Erase All Message
Push [CLEAR] to exit the screen and return to the
e
Focus bar.
• Received Call Log—Filter
The call log type which appears on the screen can be
selected on the Received Call Log Sub Menu screen.
When the Received Call Log screen is displayed,
q
rotate [DIAL] until the desired call log is highlighted,
then push [SUB].
• The Received Call Log Sub Menu screen is displayed.
Push [ENTER] to enter the "Filter" menu.
w
Rotate [DIAL] to select the desired call type to be
e
displayed on the screen.
r Push [ENTER] to set, and return to the previous
screen.
5-17
COMMON SETTING
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Advertisement
Chapters
Table of Contents
