Table of Contents
Advertisement
2
PLOTTER OPERATION
Presentation (MENU
■
<Aerial Photo Overlay menu>
<Radar Overlay menu>
w Presentation) (Continued)
D
Aerial Photo Overlay
(MENU w Presentation u Aerial Photo Overlay)
The Aerial Photo Overlay function overlays an aerial
photo on the plotter display.
The Aerial Photo cannot be displayed when the dis-
play range is set to less than 500 nm.
Push [MENU], then rotate [DIAL] until the "Presen-
q
tation" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Aerial Photo Overlay" menu
w
is highlighted, then push [ENTER].
Rotate [DIAL] to turn the Aerial Photo Overlay func-
e
tion ON or OFF.
• OFF : An aerial photo is not overlaid on the plotter
display.
• ON
: An aerial photo is overlaid on the plotter
display.
Push [ENTER] to set, then exit the "Aerial Photo
r
Overlay" menu.
D
Radar Overlay
(MENU w Presentation u Radar Overlay)
The Radar Overlay function overlays a radar display
on the plotter display while in the radar transmission
status.
Push [MENU], then rotate [DIAL] until the "Presen-
q
tation" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Radar Overlay" menu is
w
highlighted, then push [ENTER].
Rotate [DIAL] to turn the Radar Overlay function ON
e
or OFF.
• OFF : A radar display is not overlaid on the plotter
display.
• ON
: A radar display is overlaid on the plotter dis-
play.
r Push [ENTER] to set, then exit the "Radar Overlay"
menu.
NOTE:
• When this function is set to "ON," the Radar Menu
can be accessed.
• While in the following status, the Radar Overlay
function is disabled;
- The Plotter Display mode is "AR" (Automatic
Range). (p. 2-5)
- The Perspective View function is ON. (p. 2-43)
- The radar unit is in the "STBY" (stand-by) status.
• The Radar Overlay function will be cancelled;
- When the Plotter Display mode is set to "AR."
- When the radar unit status is changed from "TX"
(transmit) to "STBY."
2-36
Advertisement
Chapters
Table of Contents
