Icom MarineComander MXS-5000 Instruction Manual page 63

<Chart Marks Symbols menu>
<Chart Display Mode menu>
D Marks Symbols function
(MENU w Chart Setup u Marks Symbols)
This function sets the object type to between Interna-
tional and U.S. for NAV-AIDS (aids to navigation).
Push [MENU], then rotate [DIAL] until the "Chart
q
Setup" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Marks Symbols" menu is
w
highlighted, then push [ENTER].
Rotate [DIAL] to select the symbol type between In-
e
ternational and U.S..
r Push [ENTER] to set, then exit the "Marks Symbols"
menu.
• To cancel the setting, push [CLEAR].
D Chart Display Mode setting
(MENU w Chart Setup u Chart Display Mode)
This function sets the object display type on the plotter
display screen.
Push [MENU], then rotate [DIAL] until the "Chart
q
Setup" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Chart Display Mode" menu
w
is highlighted, then push [ENTER].
Rotate [DIAL] to select the Chart Display Mode from
e
All, Simple and Manual.
• All : All objects appear.
• Simple : • Natural Features, Road, Railway, Sea-
bed Type, Track & Routes, Light Sector
and Light Animation objects disappear.
• The sounding value disappears when it
is deeper than 3.0 meters.
• The water depth value of wrecks and
obstructions (Rock/Wreck/Obstruction/
Defuses) disappears when each value
is deeper than 9.1 meters.
• Manual : Some objects appear according to the
manual setting.
r Push [ENTER] to set, then exit the "Chart Display
Mode" menu.
• To cancel the setting, push [CLEAR].
To set the contents of the manual display mode, see
'Manual - Display Mode' as described on the next
page.
2-47
PLOTTER OPERATION
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21