Icom MarineComander MXS-5000 Instruction Manual page 160

5
COMMON SETTING
Tool (MENU w Tool)
■
D ATA & AIS (Continued)
<Number of AIS menu>
<Range of AIS – Mode menu>
<Range of AIS – Range Setup menu>
<Vector Mode menu>
• Number of AIS
(MENU w Tool u ATA & AIS u Number of AIS)
Rotate [DIAL] to set the number of AIS target which
➥
is displayed on the AIS list to between 10 and 100 in
1 digit step. (Default: 100)
• Range of AIS – Mode
( MENU w Tool u ATA & AIS u Range of AIS u
Mode)
Set the AIS information display range on the AIS list.
• All : The received AIS information are displayed
up to the number of AIS setting.
• Range : The AIS information which is transmitted
in the Range setup setting area are dis-
played.
• Range of AIS – Range Setup
( MENU w Tool u ATA & AIS u Range of AIS u
Range Setup)
Rotate [DIAL] to set the AIS information display
➥
range to between 0.25 nm and 24.00 nm in 1 nm
step. (Default: 0.50 nm)
• Vector Mode
(MENU w Tool u ATA & AIS u Vector Mode)
• True (True vector)
• Relative (Relative vector) : The predicted movement
5-14
: The predicted true motion
of a target as the result of
your own ship's direction
and speed input.
of a target relative to your
own ship.