Table of Contents
Advertisement
5
COMMON SETTING
Video screen operation (Continued)
■
D
Show Video Source ON or OFF
<Show Video Source menu>
D
Cycle Setup
(MENU w Video Setup)
<Cycle Setup screen>
(MENU w Video Setup)
5-40
When this setting is set to ON, video number or name
is displayed upper right corner.
Push [MENU], and rotate [DIAL] until the "Video
q
Setup" menu becomes highlighted.
Push [ENTER] then rotate [DIAL] to select "Show
w
Video Source."
Push [ENTER] then rotate [DIAL] to turn the "Show
e
Video Source" ON or OFF.
Push [ENTER] to set, then push [CLEAR] one or
r
more times to exit the Menu screen.
This setting selects Input Source and interval setting
for the Cycle Video operation.
Push [MENU], and rotate [DIAL] until the "Video
q
Setup" menu becomes highlighted.
Push [ENTER] then rotate [DIAL] to select "Cycle
w
Setup."
Push [ENTER] then rotate [DIAL] to enter the "Vid-
e
eo-In Selection & Interval" screen.
Push [ENTER] and rotate [DIAL] to set the Interval
r
time from 1 to 60 seconds in 1 second steps, then
push [ENTER].
Rotate [DIAL] to select the desired input source,
t
then push [ENTER].
y Repeat step t until all Video inputs will be set.
u Rotate [DIAL] to select the "Save" button, then push
[ENTER] to set and exit the screen.
Advertisement
Chapters
Table of Contents
