Icom MarineComander MXS-5000 Instruction Manual page 95

D Using the VRM and EBL
Target
VRM1
Target
VRM1
VRM2
Terget
VRM2
Terget
VRM1 readout
q Push [MENU] to enter the Menu screen.
w Rotate [DIAL] until the "EBL/VRM" menu becomes
VRM1 readout
highlighted.
e Push [ENTER], and then rotate [DIAL] until the
"VRM1..." menu (or "EBL1..." menu) becomes
highlighted.
r Push [ENTER], and then rotate [DIAL] to set the
marker.
• The yellow dotted circle appears. (Or yellow dotted line
appears.)
• The range between the center of the circle and the
target is displayed in the VRM1 readout. (Or the
degree between the ship and target is displayed in the
EBL1 readout.)
t Push [ENTER].
• The yellow dotted circle becomes red dotted circle. (Or
yellow dotted line becomes red dotted line.)
y Rotate [DIAL] until the "VRM2..." menu (or "EBL2..."
menu) becomes highlighted.
u Push [ENTER] then rotate [DIAL] to set the
marker.
• The yellow dotted circle appears. (Or yellow dotted line
appears.)
• The range between the ship and the target is displayed
in the VRM2 readout. (Or the degree between the ship
and target is displayed in the EBL2 readout.)
i Push [ENTER].
• The yellow dotted circle becomes red dotted circle.
VRM2 readout
o Push [CLEAR] twice exit the menu screen.
VRM2 readout
3-23
RADAR OPERATION
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21