Icom MarineComander MXS-5000 Instruction Manual page 117

D Standard+ Marker zoom-in screen
Appears
w
q ZOOM AREA MARKER
Underwater area around this marker is zoomed in.
w MAKER ZOOM-IN IMAGE
This image covers the specified underwater area.
• Turning ON the Marker Zoom
q Push [MENU] to enter the Menu screen.
w Rotate [DIAL] until the "Zoom" menu becomes high-
lighted.
e Push [ENTER] to enter the "Zoom" menu.
r Rotate [DIAL] until the "Zoom Mode" menu becomes
highlighted, and push [ENTER].
t Rotate [DIAL] to select the "Marker Zoom."
• Marker Zoom, Bottom Zoom and Bottom Lock are
selectable.
y Push [ENTER] to set, then exit the "Zoom Mode"
menu.
• To cancel the setting, push [CLEAR].
u Rotate [DIAL] to set the Zoom area.
(MENU w Zoom u Zoom Mode u Marker Zoom)
• Setting the Marker Zoom Range
q Push [MENU] to enter the Menu screen.
w Rotate [DIAL] until the "Zoom" menu becomes high-
lighted.
e Push [ENTER] to enter the "Zoom" menu.
r Rotate [DIAL] until the "Marker Zoom Range" menu
becomes highlighted, and push [ENTER].
t Rotate [DIAL] to select the range.
• 2, 5 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 and
150 m are selectable. (Default: 20 m)
y Push [ENTER] to set, then exit the "Marker Zoom
Range" menu.
• To cancel the setting, push [CLEAR].
4-5
SOUNDER OPERATION
q
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21