Icom MarineComander MXS-5000 Instruction Manual page 36

2
PLOTTER OPERATION
Track function (Continued)
■
WPT
MOB
FOCUS
LAYOUT
MENU
<Track List menu>
Push
<Track List—Go on Chart menu>
BRILL
[MENU]
RANGE
[SUB]
SUB
[CLEAR]
CLEAR
[DIAL]/
[ENTER]
D Track List
(MENU w Navigation u Track List...)
The track list can be checked.
Push [MENU], then rotate [DIAL] until the "Track"
q
menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Track List..." menu is high-
w
lighted, then push [ENTER].
• The Track List screen is displayed.
• When [SUB] is pushed, the following operations can be
made:
- Go on Chart (p. 2-20)
- Edit Track Info... (p. 2-21)
- Change Route... (p. 2-22)
- Erase Track (p. 2-22)
- Erase All Track (p. 2-22)
Push [CLEAR] to return to the previous screen.
e
• Track List—Go on Chart
This function enables the cursor to move to the start
point of the selected track on the plotter display.
When the Track List screen is displayed, rotate
q
[DIAL] until the desired track is highlighted, then
push [SUB].
• The Track List Sub Menu screen is displayed.
Rotate [DIAL] until the "Go on Chart" menu is high-
w
lighted, then push [ENTER].
• The Track List Sub Menu screen screen disappears, and
the cursor automatically moves to the start point of the
selected track.
2-20