Icom MarineComander MXS-5000 Instruction Manual page 28

2
PLOTTER OPERATION
Route navigation function (Continued)
■
WPT
MOB
RANGE
FOCUS
LAYOUT
MENU CLEAR
<Navigation menu>
When the "Follow Route..." menu is selected.
Navigation screen
BRILL
[MENU]
SUB
[CLEAR]
[DIAL]/
[ENTER]
D Follow Route navigation
(MENU w Navigation u Follow Route...)
To start the route navigation, follow the steps as de-
scribed below.
Make sure that the route has already been created be-
fore starting the route navigation. (p. 2-10)
The route line indication can be turned OFF. (p. 2-29)
Push [MENU], then rotate [DIAL] until the "Naviga-
q
tion" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Follow Route..." menu is
w
highlighted, then push [ENTER].
Rotate [DIAL] to select the desired route from the
e
route list.
• When [SUB] is pushed, the following operations can be
made:
- View Detail... (p. 2-14)
- Reverse Route (p. 2-15)
Push [ENTER] to start the route navigation.
r
• The navigation screen appears.
D Stop Navigation
(MENU w Navigation u Stop Navigation)
To cancel the navigation, follow the steps as described
below.
Push [MENU], then rotate [DIAL] until the "Naviga-
q
tion" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Stop Navigation" menu is
w
highlighted, then push [ENTER].
Push [ ENTER] to stop the navigation.
e
• The navigation screen disappears.
2-12