Table of Contents
Advertisement
5
COMMON SETTING
Tool (MENU
w Tool)
■
D
List (Continued)
<Waypoint Group List menu>
<Add Waypoint Group menu>
• Waypoint Group List
(MENU w Tool u List u Waypoint Group...)
The registered Waypoint groups are listed.
Push [MENU], then rotate [DIAL] until the "Tool"
q
menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "List" menu is highlighted,
w
then push [ENTER].
Rotate [DIAL] until the "Waypoint Group" menu is
e
highlighted, then push [ENTER].
• The Waypoint groups are displayed.
• When [SUB] is pushed, the following operations can be
made:
- Add Group
- Edit Group
- Erase Group
- Erase All Group
r Push [CLEAR] to exit the "Waypoint Group" menu.
• Waypoint Group List—Add Waypoint Group
A new Waypoint Group can be created on the Way-
point Sub Menu screen.
NOTE: The maximum number of waypoints in a Way-
point Group is 100.
When the Waypoint Group List is displayed, push
q
[SUB] to display the Waypoint Group Sub Menu
screen.
Push [ENTER] to enter the "Add Group..." menu.
w
Rotate [DIAL] until the "Group Name" menu be-
e
comes highlighted, and push [ENTER].
• See page 5-31 for details of the name programming.
• If you do not change the waypoint contents, go to step
r.
r Rotate [DIAL] to select "Save," then push [ENTER]
to save the Waypoint Group and return to the previ-
ous screen.
• If "Cancel" is selected, the setting will be cancelled.
5-6
Advertisement
Chapters
Table of Contents
