Icom MarineComander MXS-5000 Instruction Manual page 24

2
PLOTTER OPERATION
Waypoint operation (Continued)
■
• Longitude data programming screen
• Date data programming screen
• Time data programming screen
• Temperature data programming screen
Longitude data programming:
q Rotate [DIAL] to select "Position Lon," and push
[ENTER].
w Rotate [DIAL] to set the longitude data, then push
[ENTER] to input it.
• Push [≈] to move the cursor forward.
• Push [Ω] to move the cursor backward.
• Select "W" to input W; West longitude.
• Select "E" to input E; East longitude.
Date data programming:
q Rotate [DIAL] to select "Date," and push [ENTER].
w Rotate [DIAL] to set the desired date data, then
push [ENTER] to input it.
• Push [≈] to move the cursor forward.
• Push [Ω] to move the cursor backward.
Time data programming:
q Rotate [DIAL] to select "Time," and push [ENTER].
w Rotate [DIAL] to set the current UTC time data,
then push [ENTER] to input it.
• Push [≈] to move the cursor forward.
• Push [Ω] to move the cursor backward.
• Select "AM" or "PM" when the time format is set to "12
hours."
Temperature data programming:
q Rotate [DIAL] to select "Temp." and push [EN-
TER].
w Rotate [DIAL] to set the desired temperature data,
then push [ENTER] to input it.
• Push [≈] to move the cursor forward.
• Push [Ω] to move the cursor backward.
2-8