Table of Contents
Advertisement
2
PLOTTER OPERATION
Chart Setup (MENU
■
D
Manual Display Mode setting (Continued)
<Wrecks & Obstructions–Presentation menu>
<Wrecks & Obstructions–Rock Depth menu>
<Wrecks & Obstructions–Depth Setting menu>
w Chart Setup)
• Wrecks & Obstructions–Presentation
( MENU w Chart Setup u Manual - Display Mode u
Wrecks & Obstructions u Presentation)
This item enables the wrecks and obstructions to be
displayed on the plotter display.
• OFF
: The wrecks and obstructions are not dis-
played on the plotter display.
• ON
: The wrecks and obstructions are displayed
on the plotter display.
• Wrecks & Obstructions–Rock Depth,Wreck Depth,
Obstruction Depth, Defuses Depth
( MENU w Chart Setup u Manual - Display Mode u
Wrecks & Obstructions u Rock Depth/Wreck Depth/
Obstruction Depth/Defuses Depth)
This item enables the water depth of wrecks and ob-
structions to be displayed on the plotter display.
Rotate [DIAL] until the desired object menu is high-
q
lighted, then push [ENTER].
Rotate [DIAL] to turn the selected object indication
w
ON or OFF.
• OFF : The selected object's water depth value is
not displayed on the plotter display.
• ON
: The selected object's water depth value is
displayed on the plotter display.
• Wrecks & Obstructions–Depth Setting
( MENU w Chart Setup u Manual - Display Mode u
Wrecks & Obstructions u Depth Setting)
Set the maximum water depth value to be displayed on
the plotter display.
Rotate [DIAL] to adjust the maximum water depth
➥
value to between 0 m and 2800 m in 1 meter step.
(Default: 30 m)
2-50
Advertisement
Chapters
Table of Contents
