Icom MarineComander MXS-5000 Instruction Manual page 46

2
PLOTTER OPERATION
Presentation (MENU
■
<Track Show menu>
<Track Setup menu>
• Track–Presentation Setup screen
w Presentation) (Continued)
D Track
Push [MENU], then rotate [DIAL] until the "Presen-
q
tation" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Track" menu is highlighted,
w
then push [ENTER].
Rotate [DIAL] until the desired menu is highlighted,
e
then push [ENTER].
• Show
(MENU w Navigation u Track u Show)
The Track Route line indication can be turned ON or
OFF.
• OFF : The Track Route line is not displayed on the
plotter display.
• ON : The Track Route line is displayed on the
plotter display.
• Setup...
(MENU w Navigation u Track u Setup...)
The individual Track Route line indication can be turned
ON or OFF.
This item can be set only when the Track Route line is
turned ON in the "Show" item as above.
NOTE: Only one Track Route line can be displayed
on the plotter display, except for the "Current."
Push [ENTER] then rotate [DIAL] until the desired
q
track is highlighted.
Push [Ω] or [≈] to turn the selected Track Route line
w
indication ON or OFF.
• OFF : The selected Track Route line is not dis-
played on the plotter display.
• ON : The selected Track Route line is displayed
on the plotter display.
Push [CLEAR] to set, then exit the "Setup..." menu.
e
2-30