Icom MarineComander MXS-5000 Instruction Manual page 47

<DSC menu>
<DSC Auto Position menu>
D DSC
(MENU w Presentation u DSC)
The DSC position icon ("
ON or OFF.
The MarineCommander™ should receive time/date
data from the GPS receiver.
Push [MENU], then rotate [DIAL] until the "Presen-
q
tation" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "DSC" menu is highlighted,
w
then push [ENTER].
Rotate [DIAL] to turn the DSC position icon indica-
e
tion ON or OFF.
• OFF : The DSC position icon is not displayed.
• ON : When the DSC call, stored in "Received Call
Log," has position information, the DSC po-
sition icon is displayed on that point where
the call is transmitted to.
r Push [ENTER] to set, then exit the "DSC" menu.
NOTE: When there is an unread message including
the position information in "Received Call Log," the
DSC position icon is displayed with bold text.
D DSC Auto Position
(MENU w Presentation u DSC Auto Position)
The DSC Automatic Position Log indication can be
turned ON or OFF.
Push [MENU], then rotate [DIAL] until the "Presen-
q
tation" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "DSC Auto Position" menu is
w
highlighted, then push [ENTER].
Rotate [DIAL] to turn the DSC Automatic Position
e
Log indication ON or OFF.
• OFF : The DSC Automatic Position Log is not dis-
played on the plotter display.
• ON : The DSC Automatic Position Log is dis-
played on the plotter display.
r Push [ENTER] to set, then exit the "DSC Auto Posi-
tion" menu.
2-31
PLOTTER OPERATION
") indication can be turned
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21