Icom MarineComander MXS-5000 Instruction Manual page 57

<Guardian Alarm Zone menu>
<Guardian Alarm Range menu>
<Guardian Alarm Depth menu>
D Guardian Alarm Zone setting
(MENU w Alarm Setup u Guardian Alarm Zone)
The alarm zone appearance as a red triangle can be
set. It appears in your COG direction to search for
dangerous objects or shallow depth, according to your
specified alarm or depth range.
Push [MENU], then rotate [DIAL] until the "Alarm Set-
q
up" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Guardian Alarm Zone" menu
w
is highlighted, then push [ENTER].
Rotate [DIAL] to select the Guardian Alarm zone
e
"Visible" or "Hidden."
• Visible : The alarm zone appears in your COG di-
rection according to your specified alarm
or depth range.
• Hidden : The alarm zone does not appear.
r Push [ENTER] to set, then exit the "Guardian Alarm"
menu.
• To cancel the setting, push [CLEAR].
D Guardian Alarm Range setting
(MENU w Alarm Setup u Guardian Alarm Range)
Push [MENU], then rotate [DIAL] until the "Alarm Set-
q
up" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Guardian Alarm Range"
w
menu is highlighted, then push [ENTER].
e Rotate [DIAL] to set the Guardian Alarm Range to
between 0.01 nm and 10.00 nm. (Default: 0.25 nm)
r Push [ENTER] to set, then exit the "Guardian Alarm
Range" menu.
• To cancel the setting, push [CLEAR].
D Guardian Alarm Depth setting
(MENU w Alarm Setup u Guardian Alarm Depth)
Push [MENU], then rotate [DIAL] until the "Alarm Set-
q
up" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Guardian Alarm Depth"
w
menu is highlighted, then push [ENTER].
e Rotate [DIAL] to set the Guardian Alarm Depth to
between 1 m and 2800 m. (Default: 9 m)
r Push [ENTER] to set, then exit the "Guardian Alarm
Depth" menu.
• To cancel the setting, push [CLEAR].
2-41
PLOTTER OPERATION
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21