Icom MarineComander MXS-5000 Instruction Manual page 67

<Chart Language menu>
• Others
( MENU w Chart Setup u Manual - Display Mode u
Natural Features/River & Lakes/Cultural Features/
Roads/Railways/Ports & Service/Landmarks/Sea-
bed Type/Tide & Currents/Tracks & Routes/Attention
Areas)
These items enable the following objects to be dis-
played on the plotter display; Natural Features, River
& Lakes, Cultural Features, Roads, Railways, Ports &
Service, Landmarks, Seabed Type, Tide & Currents,
Tracks & Routes and Attention Areas.
• OFF : The selected objects are not displayed on
the plotter display.
• ON : The selected objects are displayed on the
plotter display.
D Chart Language setting
(MENU w Chart Setup u Chart Language)
Selects the display language from the list.
The contents of the "Object Info" screen in the Cursor
menu and the place-name on the map* will be con-
verted to the selected language.
* Only the area where the selected language is used as
its mother tongue.
Push [MENU], then rotate [DIAL] until the "Chart
q
Setup" menu is highlighted, then push [ENTER].
Rotate [DIAL] until the "Chart language" menu is
w
highlighted, then push [ENTER].
Rotate [DIAL] to select the Chart language from the
e
list.
• Chinese, Danish, Dutch, English, Finnish, French, Ger-
man, Greek, Italian, Japanese, Korean, Norwegian,
Polish, Russian, Spanish, Swedish and Thai are select-
able.
r Push [ENTER] to set, then exit the "Chart language"
menu.
• To cancel the setting, push [CLEAR].
2-51
PLOTTER OPERATION
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21