Icom MarineComander MXS-5000 Instruction Manual page 151

<Erase Waypoint menu>
<Erase All Waypoint menu>
• Waypoint List—Erase Waypoint
A waypoint can be erased on the Waypoint Sub Menu
screen.
NOTE: If the waypoint is set as destination or is part of
a route, it can not be erased.
When the Waypoint List is displayed, rotate [DIAL]
q
until the desired waypoint becomes highlighted.
Push [SUB] to display the Waypoint Sub Menu
w
screen.
Rotate [DIAL] until the "Erase Waypoint" menu be-
e
comes highlighted, and push [ENTER].
r Rotate [DIAL] to select "OK," then push [ENTER] to
erase the Waypoint and return to the previous screen.
• If "Cancel" is selected, the waypoint erasing will be can-
celled.
• Waypoint List—Erase All Waypoint
A waypoint can be erased on the Waypoint Sub Menu
screen.
NOTE: If the waypoint is set as destination or is part of
a route, it can not be erased.
When the Waypoint List is displayed, push [SUB] to
q
display the Waypoint Sub Menu screen.
Rotate [DIAL] until the "Erase All Waypoint" menu
w
becomes highlighted, and push [ENTER].
e Rotate [DIAL] to select "OK," then push [ENTER]
to erase the Waypoint and return to the previous
screen.
• If "Cancel" is selected, the waypoint erasing will be can-
celled.
5-5
COMMON SETTING
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21